Royal Hydrotech
+91-98-11-85-43-41, Bhiwadi, Alwar, Rajasthan
08048968769 80% Response Rate
Send E-mail
- Home
- »
- Products & Services
- »
- Rubber Molding Machine
| Capacity | 20TONS |
| Machine Type | 4-Pillar Type |
| No. of Station | Double |
| Platen Size | as per customize |
| Stroke Length | as per customize |
| Bore Diameter | as per customize |
Here's a detailed specification and overview for a 300 x 300 mm Laboratory Type Compression Moulding Machine – 20 Ton capacity:
🔧 Machine OverviewA 20 Ton Laboratory Compression Moulding Machine with 300 x 300 mm heated platens is ideal for R&D labs, testing, and small-scale production of rubber, plastic, composites, and thermoset materials.
📐 Technical Specifications| Parameter | Details |
|---|---|
| Type | Laboratory Type Compression Moulding Press |
| Pressing Capacity | 20 Ton (200 kN) |
| Platen Size | 300 mm x 300 mm |
| Daylight Opening | 100–300 mm (adjustable) |
| Ram Stroke | ~150 mm (customizable) |
| No. of Daylights | Single (can be customized for 2-deck setups) |
| Frame Type | Four-pillar / H-frame (depends on rigidity & accessibility preference) |
| Platen Heating | Electric (cartridge heaters / embedded heaters) |
| Max. Temperature | 300°C (optional upgrade to 350°C) |
| Heating Control | Dual PID Controllers (1 for each platen) with thermocouple feedback |
| Pressure Control | Manual or automatic hydraulic pressure regulator |
| Hydraulic System | Integrated power pack with pressure gauge & relief valve |
| Cooling System | Optional: Water channels inside platens with manual/auto flow control |
| Control Options | Manual, Semi-automatic, or PLC with HMI |
| Safety Features | Emergency stop, pressure relief valve, hand guards, safety curtain (optional) |
| Power Supply | 3-phase, 415V / 50Hz (customizable based on region) |
Research and development of elastomers, thermoplastics, composites
Laminate sheet forming
Molding of ASTM/ISO standard test specimens
Polymer and prepreg testing
Material performance evaluation
Digital load and temperature logging (for data acquisition)
Mold preheat timer and auto cycle timer
Vacuum chamber or bell jar system (for composite work)
Auto ejection system for finished parts
T-slot platens for flexible mould mounting
If you're planning to build or order one, manufacturers often offer customization in:
Closing/opening speed
Heating type (electric, oil, steam)
Temperature zone count
Control interface (touchscreen HMI vs manual switches)
Would you like:
A reference design (CAD or 2D layout)?
Vendor or pricing recommendations?
Help comparing manual vs PLC-controlled versions?
| Capacity | 30 TONS |
| Machine Type | 4-Pillar Type |
| Stroke Length | as per customize |
| Bore Diameter | as per customize |
| Condition | New |
Here’s a detailed technical overview of a 300 x 300 mm Laboratory Type Compression Moulding Machine – 30 Ton Capacity, ideal for molding thermoset plastics like Bakelite, epoxy, and rubber under controlled lab conditions.
✅ Technical Specifications| Parameter | Specification |
|---|---|
| Platen Size | 300 mm × 300 mm |
| Pressing Force | 30 Tons (300 kN) |
| Press Type | Hydraulic |
| Maximum Operating Pressure | ~200 Bar (adjustable via pressure regulator) |
| Heating Method | Electrically heated platens (cartridge or strip) |
| Max Temperature | Up to 300°C (typical range: 50–300°C) |
| Temperature Control | Dual PID temperature controllers (±1°C accuracy) |
| Control Panel | Digital HMI or analog switchboard |
| Cycle Timer | Digital timer (0–9999 sec) |
| Dwell Time Control | Yes (preset hold time under pressure) |
| Construction Type | Four-column or C-frame rigid structure |
| Ejection System | Manual or hydraulic ejector (optional) |
| Power Supply | 3 Phase, 415V, 50 Hz (or customized) |
Precision pressure and temperature control for reproducibility
Polished platen surface for uniform heat distribution
Manual or semi-automatic operation
Safety guards and emergency stop built in
Compact footprint suitable for R&D labs and universities
Molding Bakelite, epoxy, silicone rubber, etc.
Producing lab-scale samples or test plaques
Material development and compound evaluation
ASTM/ISO/IEC specimen preparation
| Capacity | 100 tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Double |
| Platen Size | 400 MM X400 MM |
| Stroke Length | as per customize |
| Bore Diameter | as per customize |
| Motor Power | as per customize |
| Condition | New |
Here is a complete specification and description for a 400 x 400 mm Rubber Vacuum Compression Moulding Press Machine – 100 Tons. This type of machine is ideal for high-precision rubber moulding applications with the benefits of vacuum-assisted moulding to eliminate air entrapment and improve part quality.
🛠️ Machine Overview:Name: Rubber Vacuum Compression Moulding Press Machine
Platen Size: 400 mm × 400 mm
Clamping Force: 100 Ton (1000 kN)
Type: Vacuum-assisted hydraulic compression press
Application: Precision rubber component moulding for automotive, aerospace, medical, and electronics industries
| Parameter | Specification |
|---|---|
| Platen Size | 400 mm × 400 mm |
| Clamping Force | 100 Tons (1000 kN) |
| Heating Type | Electric platen heaters (optional oil heating) |
| Max. Temperature | Up to 300°C |
| Temperature Accuracy | ±1°C with PID controllers |
| Platen Material | Hardened, ground tool steel |
| Daylight Opening | 300–400 mm (customizable) |
| Ram Stroke | ~300 mm (adjustable) |
| Vacuum System | Integrated vacuum chamber with pump |
| Control System | PLC with HMI (touchscreen interface) |
| Hydraulic System | Servo or conventional hydraulic with pressure control |
| Cycle Time | Depends on rubber type (~5–10 minutes) |
| Cooling Option | Water channels in platens (optional) |
| Power Supply | 3 Phase, 380–480V, 50/60Hz |
Vacuum chamber ensures void-free, high-finish rubber mouldings
High tonnage for better mould filling and product compaction
Fully programmable curing cycles and pressure profiles
Even platen temperature for uniform curing
Suitable for multi-cavity or complex rubber components
Optional auto ejector and mold shifting mechanisms
Automatic mold closing/opening system
Mold ejection mechanism
Recipe storage and data logging system
Remote operation / Industry 4.0 readiness
Oil heating system for high thermal efficiency
Automotive gaskets and seals
Medical-grade rubber parts
Aerospace O-rings and isolators
Electronics shock absorbers and bushings
Lab-to-production scale-up trials
Would you like:
A quotation template or price estimate
A product catalog description
A specification sheet (PDF) format
Help finding a manufacturer or supplier
| Capacity | 325 TONS |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 670 MM X 600 MM |
| Stroke Length | as per customize |
| Bore Diameter | as per customize |
| Motor Power | as per customize |
| Condition | New |
Machine Type: Hydraulic Compression Moulding Press
Configuration: Single Station
Stroke Type: Upstroking (bottom platen moves upward)
Clamping Force: 325 Tons (3250 kN)
Platen Size: 670 mm x 600 mm
Application: Industrial-scale rubber, composite, and thermoset moulding operations
| Parameter | Specification |
|---|---|
| Platen Size | 670 mm × 600 mm |
| Clamping Force | 325 Tons (3250 kN) |
| Platen Material | Hardened ground steel with high thermal conductivity |
| Heating Method | Electric (cartridge or strip heaters) or oil-heated |
| Max Temperature | Up to 300°C (±1°C control accuracy) |
| Daylight Opening | 400–500 mm (customizable) |
| Ram Stroke | ~400 mm (customizable based on mold height) |
| Frame Type | 4-post or H-frame structure |
| Motion Type | Upstroking hydraulic cylinder from bottom |
| Control System | PLC with HMI touchscreen (with recipe storage) |
| Cycle Operation | Manual / Semi-automatic / Fully automatic |
| Power Supply | 3 Phase, 380–480V, 50/60Hz |
| Hydraulic System | High-pressure pump with adjustable pressure & flow |
| Cooling System | Optional platen water cooling system |
| Safety Features | Emergency stop, pressure relief valve, safety guards |
High clamping force for large or deep-draw moulds
Upstroking action provides precision alignment and better mold safety
Suitable for large rubber, FRP/SMC/BMC, and thermoset components
High-efficiency thermal insulation and platen heating
Rugged, industrial-grade build for continuous operation
Optional data logging and Industry 4.0 compatibility
Vacuum chamber integration (for air-free precision moulding)
Automatic mold opening/ejection system
Servo-hydraulic drive (for energy savings & finer control)
Mold alignment guides, ejector pins, and quick mold change setup
Graphing interface for temperature vs. pressure vs. time
Large-size rubber parts (e.g., gaskets, dampers, bushings)
Composite SMC/BMC panel moulding
Electrical insulation boards, terminal blocks
Medium- to large-volume industrial part production
Prototyping and R&D for composite material products
Would you like:
A quotation template or pricing estimate
A technical datasheet (PDF format)
A catalog-style product description
A 3D layout drawing or floor plan suggestion
Help sourcing a manufacturer or vendor?
| Capacity | as per customize |
| Material | RH |
| Power Source | as per customize |
| Automation Grade | Automatic |
| Phase | as per customize |
| Country of Origin | Made in India |
Here's a detailed overview of a 200 x 200 mm Laboratory Type Compression Moulding Press (10 Tons) — commonly used for R&D and quality testing of thermosetting plastics like Bakelite:
✅ Specifications| Parameter | Details |
|---|---|
| Platen Size | 200 mm × 200 mm |
| Tonnage Capacity | 10 Tons (approx. 100 kN) |
| Type | Laboratory Compression Moulding Press |
| Press Type | Hydraulic (most common) |
| Heating System | Electric heaters (cartridge or platen type) |
| Max Temperature | Typically up to 300°C |
| Temperature Control | Digital PID controller (±1°C accuracy) |
| Pressure Gauge | Analog or digital (optional load cell feedback) |
| Closing Speed | Adjustable (slow for accurate molding) |
| Power Supply | 230V or 415V AC, 50 Hz |
| Construction | Rigid steel frame (C-frame or Four-column type) |
Manual, semi-automatic, or fully automatic operation
Timer and dwell settings for precise curing cycles
Insulated platens to reduce heat loss
Overpressure protection
Compact tabletop design for lab environments
Molding and curing of Bakelite and other thermosets
Quality control of polymer formulations
Preparation of test plaques or specimens for:
Tensile strength testing
Impact testing
Thermal aging studies
Data logging system (USB or Ethernet)
Safety interlocks and emergency stop
Mold cooling system (air or water cooled)
Vacuum chamber (for void-free molding)
| Capacity | as per customize |
| Material | MS |
| Power Source | as per customize |
| Automation Grade | Automatic |
| Country of Origin | Made in India |
A 200 x 200 mm Laboratory Type Compression Moulding Press (10 Tons) is a compact press designed for material forming or testing applications, typically used in research and development, quality control, or academic labs. Here's a breakdown of what it generally includes and its typical specifications:
🔧 Key Specifications| Parameter | Details |
|---|---|
| Platen Size | 200 mm x 200 mm |
| Pressing Capacity | 10 Tons (approx. 100 kN) |
| Type | Manual / Hydraulic / Pneumatic / Electrically operated |
| Maximum Temperature | Often up to 300°C (for heated platen models) |
| Temperature Control | PID controller with individual zone control |
| Pressure Control | Manual gauge / digital readout with safety overload |
| Application | Thermoplastic or thermoset moulding, rubber testing, etc. |
| Power Supply | 230V or 415V (depending on model) |
| Frame Type | C-frame or H-frame (rigid for uniform pressure) |
Polymer Sheet Moulding
Rubber Sample Testing
Composite Material Curing
Specimen Preparation (for ASTM/ISO tests)
Heated platens (electrically or oil heated)
Digital or touchscreen HMI control
Water cooling system for rapid cycle
Programmable pressure/time/temperature profiles
Data logging and USB/PC connectivity
| Capacity | 20 TONS |
| Material | MS |
| Automation Grade | Automatic |
| Phase | 3 Phase |
| Country of Origin | Made in India |
Here’s a concise and complete specification sheet for a 300 x 300 mm Laboratory Type Compression Moulding Press – 20 Ton:
🏗️ Laboratory Compression Moulding Press – 300 x 300 mm, 20 Tons ✅ General Description:A 20 Ton capacity lab press designed for compression moulding of rubber, plastic, thermoset, and composite materials. Ideal for material R&D, small-scale production, and standard test sample preparation.
📐 Technical Specifications| Feature | Specification |
|---|---|
| Press Type | Laboratory Compression Moulding Press |
| Pressing Force | 20 Tons (200 kN) |
| Platen Size | 300 mm x 300 mm |
| Platen Material | Hardened steel / chrome plated (optional) |
| Platen Heating | Electric heaters (cartridge or embedded) |
| Max. Temperature | 300°C (optional up to 350°C) |
| Temperature Control | Digital PID controllers (1 zone per platen) |
| Daylight Opening | 250 mm (customizable between 100–300 mm) |
| Stroke | 150 mm (customizable) |
| Number of Daylights | Single daylight |
| Hydraulic System | Integrated hydraulic power pack with pressure gauge |
| Control Type | Manual / Semi-Automatic / PLC with HMI |
| Frame Type | Four-pillar or H-frame |
| Safety Features | Emergency stop, pressure relief valve, hand guard |
| Power Supply | 3 Phase, 415V, 50 Hz (can be customized) |
| Cooling System (Optional) | Water-cooled platens with manual/automatic control |
Material R&D labs (rubber, thermoplastics, composites)
ASTM/ISO specimen moulding
Lamination of thin sheets
Prototyping and small batch production
Heat/pressure testing of material samples
Mold ejection system
Data logging (load, temperature, pressure)
Vacuum chamber for composites
Automatic mold closing/opening
Mold mounting T-slots
Would you like:
A 2D technical drawing?
CAD model or assembly suggestion?
Vendor list or pricing estimate?